Tools for Watch Bracelets

Bergeon 6767-F Spring Bar Removing Tool Bergeon 6767-F Spring Bar Removing Tool is an essential tool for anyone that sells straps. It makes changin...

Bergeon 6767-S Spring Bar Removing Tool is an essential tool for anyone that sells straps. It makes changing straps much easier. This remover has a...

Fine Fork End 6767-F Bergeon Spring Bar Tool Fine Fork End ( 1.20mm) for Bergeon 6767-F spring bar tool. These ends thread into the Bergeon 6767-F ...

Bracelet Pin Removing Tool Easy to Use Link Remover is a handy, easy to use tool essential for removing pins from metal link watch bands. Made of g...

Fine Pointed End 6767-F Bergeon Spring Bar Tool ( 0.80 mm) for Bergeon 6767-F spring bar tool. These ends thread into the Bergeon 6767-F spring bar...

Set of 3 Punches Set of 3 punches consists of 3 different diameter of pin punches. Ideally recommended to be used with a small brass mallet and pla...

Individual Pin Punch for Bracelet Pins are available in 0.70 mm, 0.80 mm and 1.00 mm. These punches allow you to drive out link pins on watch brace...

Soft Standard Bergeon Bracelet Block With Slots is designed to hold watch bracelets upright to make bracelet pin removal easier. This soft standard...

Slotted Plastic Block Horotec is made of high impact plastic. This can be used on it's own or as a replacement part for the Horotec 10.500 Bracelet...

Spare Tips for 66-189820 are supplies as a package of 10 replacement pins available in 0.70 mm, 0.80 mm, and 1.00 mm for the pin punch set 66-18982...

Pins for Bergeon 6744 Bracelet Tool are replacement pins for both the Bergeon 6744 and Bergeon 6745-100 Bracelet Tool. These pins are supplied in a...

Link Removing Plier is perfect for removing slip springs in expandable watch bands. The flat jaw rests atop the ling, the pointed round tip of the ...

Standard Bergeon Bracelet Block With Slots standard bracelet block With slots is designed to hold watch bracelets upright to make bracelet pin remo...

Pointed End 6767-S Spring Bar Tool Pointed End for Bergeon 6767-S Spring Bar Tool. These ends thread into the Bergeon 6767-S spring bar tool. When ...

Replacement Plungers for 66-9006 are available in 0.60 mm, 0.80 mm, 1.00 mm, 1.20 mm and 1.50 mm.

Replacement Pins for 66-189810 is a package of 3 replacement pins for the "Easy to Use Link Remover" number 66-189810. This pins are friction fitte...

Revolving Belt Punch Revolving Belt Punch can be used for punching additional holes into leather watch straps. The smallest holes of this revolving...

Economical Bracelet Pin Plier is designed to help you remove and replace bracelet pins quickly and smoothly.This one tool allows you to size watch ...

Wide Slotted Bracelet Block is designed to hold watch bracelets upright to make bracelet pin removal easier. This wide slotted bracelet block is ma...

Bracelet Adjusting Tool This tool is used to help adjust the Alpine Collection of Jewellery Bracelets, as well as the Alpine Collection of Metal Wa...

Awl Type Pin Pusher is a handy tool for releasing spring bars on cases with the spring bar hole drilled completely through the lugs.

Strap Notching Plier 3.0mm Strap Notching Plier 3.0mm is a heavy duty tool with hardened jaws to ensure a clean cut. This plier is used for notchin...

Soft Wide Slot Bergeon Bracelet Block is designed to hold watch bracelets upright to make bracelet pin removal easier. This soft standard bracelet ...

Replacement Screwdriver Blades for Bergeon 6745-100 fits item # 64-6745-100 bracelet press. These replacement screwdriver blades are available in 1...

Strap Notching Plier 1.5mm Strap Notching Plier 1.5mm is a heavy duty tool with hardened jaws to ensure a clean cut. This plier is used for notchin...

Pin Holder for Bergeon 6744 Bracelet Tool Pin Holder for Bergeon 6744 Bracelet Tool. This Pin Holder takes the complete range of pins form 0.40mm i...

Replacement Pin for 66-9005 Replacement Pin for 66-9005 is supplied individually. This pin has a diameter of 0.80mm. The plunger that holds this pi...

30080-Y Fixation Screws These fixation screws are the small screws on the side of screwdrivers, and pin removing tools to hold the blades of these ...

Flat End for Prideline Spring Bar Tool This is the flat, (forked end) for the Prideline spring bar tool. This tool has threaded collets on both end...

Bracelet Filing Block Bracelet filing block is a specialized block used when adjusting solid T-Ends of metal watch bracelets. This block has 6 diff...

Tool to Drive Out Bracelet Pins 2 supports in synthetic material allows watch to be held in a good position to drive out pins. For watches with le...

Watch Bracelet Shear A*F Switzerland Watch Bracelet Shear A*F Switzerland is a specialized shear for cutting "Milanais" and "Polonais" watch bracel...