Clock Bushing Tools

Hand Reamer Set made in USA is an American made version hand reamer set compatible with KWM Bushings. US Hand Reamer Set consists of 5 Reamers, 1 ...

Pivoted Cutter 3 mm Bergeon is a replacement part for the Bergeon bushing tool. The cutter diameter is 3 mm and has a pivot diameter of 0.70 mm. Th...

Reamer 3.47 mm Bergeon a replacement reamer which is inserted into the center chaft of the Bergeon bushing tool. Reamers cut into the plates of the...

Reamer 2.47 mm Bergeon a replacement reamer which is inserted into the center shaft of the Bergeon bushing tool. Reamers cut into the plates of the...

Reamer 1.97 mm Bergeon is a replacement reamer which is inserted into the center shaft of the Bergeon bushing tool. Reamers cut into the plates of...

Reamer 2.97 mm Bergeon a replacement reamer which is inserted into the center shaft of the Bergeon bushing tool. Reamers cut into the plates of the...

Drill Press Adapter for Bergeon fits your drill press to take Bergeon reamers. This is not a Bergeon tool. This adapter allows you to use the Berge...

Reamer 5.47 mm Bergeon is a replacement Rramer which is inserted into the center shaft of the Bergeon bushing tool. Reamers cut into the plates of ...

Bergeon Bushing Tool "Swiss Made" clock and alarm clock bushing tool. This is a very popular and well accepted clock bushing tool used by both the ...

Centering Bit Bergeon Used with the Bergeon bushing tool. The centering bit helps to locate the exact position of the original pivot holes, allowin...

Reamer 4.47 mm Bergeon is a replacement reamer which is inserted into the center shaft of the Bergeon bushing tool. Reamers cut into the plates of ...

Screw for Cutting Reamers Bergeon this screw fits in the shaft that accepts the cutting reamers. This screw can get worn out, for those using their...

Hand Reamer Handle for Bergeon This is not a Bergeon tool. This handle accepts all genuine Bergeon reamers. This hand reamer handle allows you to p...

Bushing Tool Jig is a special jig which you slip between the escape wheel bridge and front plate for support while reaming and pushing a bushing. B...

Reamer 2.68 mm made in USA is a Replacement Reamer which is inserted into the Center Shaft of the KWM Bushing Tool. The American made US 2.68 mm Re...

Reamer 1.20 mm Bergeon is a replacement reamer which is inserted into the Center Shaft of the Bergeon bushing tool. Reamers cut into the plates of ...

Center Shaft only KWM (Flume) is the shaft that accepts the reamers, chamfering cutter, and pushers when installing bushings.

Reamer 1.78 mm KWM (Flume) is a Reamer which is inserted into the Center Shaft of the KWM bushing tool. The 1.78 mm KWM reamer cuts into the plate ...

Reamer 8.64 mm made in USA is a Replacement Reamer which is inserted into the Center Shaft of the KWM Bushing Tool. The American made US 8.64 mm Re...

Reamer 7.47 mm Bergeon is a replacement reamer which is inserted into the center shaft of the Bergeon bushing tool. Reamers cut into the plates of ...

Chamfering Tool 4 mm Bergeon Swiss quality chamfering cutter used with the Bergeon bushing tool. This chamfering tool is used for removing residues...

Stake Undrilled Bergeon is 25mm in diameter and used only for the Bergeon Bushing System. The Undrilled Bergeon Stake fits into the bottom of the B...

Reamer Set for KWM (Flume) Bushing Tool is a genuine KWM product. This is a set of 5 reamers for the KWM bushing tool numbers 1 to 5. This set of r...

Hand Reamer Set KWM (Flume) has a special handle, chamfering cutter and 5 reamers with side pins for setting bushings without the KWM frame. Genuin...

KWM Adapter for Bergeon Bushing Tools is an adapter to use KWM reamers in the Bergeon bushing tool. This is not a Bergeon tool. KWM adapter for Ber...

Stake Drilled 10 mm Bergeon is 10 mm in diameter and has a hole diameter of 5 mm. This drilled stake is a replacement part for the Bergeon bushing ...

Reamer 2.68 mm Bergeon to use KWM bushings is a Bergeon made, Swiss quality replacement reamer which is inserted into the center shaft of the Berge...

Pivoted Cutter 5 mm Bergeon is a replacement part for the Bergeon bushing tool. The cutter diameter is 5 mm and has a pivot diameter of 1.5 mm. The...

Pivoted Cutter 2.20 mm Bergeon is a replacement part for the Bergeon bushing tool. The cutter diameter is 2.20 mm and has a pivot diameter of 0.40 ...

Reamer 2.68 mm KWM (Flume) is a reamer which is inserted into the center shaft of the KWM bushing tool. The 2.68 mm KWM reamer cuts into the plate ...

KWM Universal Complete Bushing System this bushing system comes complete with the newly designed Universal Bushing Tool (item # 24-391), the KWM Wo...

KWM Working Block the KWM press-fit tool can be screwed onto the KWM working block and thus used on every work station. The KWM Working Block inclu...

Bergeon Adapter for KWM Bushing Tool all bronze bearings can now be pressed in with KWM. One device for two storage systems! It clamps reamers safe...

KWM Centering Point used with the KWM Bushing Tool is inserted into the center shaft. The centering point locates the exact position of original pi...

Reamer 6.47 mm Bergeon is a replacement reamer which is inserted into the center shaft of the Bergeon bushing tool. Reamers cut into the plates of ...

Driving Punch 9 mm Bergeon is a driving punch, no hole, with a diameter of 9 mm, used with the Bergeon bushing system. This punch allows you to dr...

Driving Punch 6 mm Bergeon is a driving punch, no hole, with a diameter of 6 mm To be used with the Bergeon bushing system. The Bergeon driving pun...

Electric Screwdriver Adaptor for Bergeon allows you to use the Bergeon system of reamers with your electric screwdriver, to install Bergeon series ...

Stake Drilled 16 mm Bergeon is 16 mm in diameter and has a hole diameter of 8 mm. This stake is a replacement part for the Bergeon bushing system. ...

Pivoted Cutter 9 mm Bergeon is a replacement part for the Bergeon bushing tool. The cutter diameter is 9 mm and has a pivot diameter of 5 mm. The B...

Pivoted Cutter 6 mm Bergeon is a replacement part for the Bergeon bushing tool. The cutter diameter is 6 mm and has a pivot diameter of 3 mm. The B...

Drill Press Adaptor for KWM made in USA an American made adapter to fit your drill press to take KWM reamers. This adapter is designed to be used i...

Chamfering Cutter made in USA American made used for removing residues left behind from the cutting process. This Chamfering Cutter is to be used w...