Crystal Gaskets

Assortment of O-Ring Gaskets an assortment of 100 pieces of rubber oring gaskets. This assortment is available in sizes 14 to 30mm.

Assortment of Flat Rubber Gaskets an assortment of 100 pieces of flat rubber gaskets. This assortment is available in sizes 14 to 30 mm and 32 to 5...

These "I" shaped gaskets are used when installing thick mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 1.20 mm, ...

These "I" shaped gaskets are used when installing thin mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 0.80 mm, wi...

These "I" shaped gaskets are used when installing thin mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 0.80 mm, wi...

These "L" shaped gaskets are used when installing thick mineral or sapphire crystals into watch cases, sizes available are as follows

Assortments of O-Ring Gaskets 0.50mm are supplied in a small plastic box. This assortment of O-Ring gaskets have a body diameter of 0.50mm and cont...

Extra Wide O-Ring Gasket Asst this is an extra wide o-ring gasket assortment that contains 60 gaskets of sizes ranging from 33 to 42 mm in 0.50 and...

These "I" shaped gaskets are used when installing thin mineral or sapphire crystals into watch cases. Height of these Hytrel gaskets is 0.80 mm, wi...

Micro O-Ring Gasket Assortment - 1.20 to 2.50mm are used for replacing crown, or pusher gaskets, and refills are available. Assortments have 10 eac...

Micro O-Ring Gasket Assortment - 0.50 to 1.00mm are used for replacing crown, or pusher gaskets, and refills are available. Assortments have 10 eac...

Slim O-Ring Case Back Gasket number 459, package of 2, ID 36.00 mm, OD 37.20 mm, thickness 0.60 mm

Omega® 088NS5082 O-Ring gasket (Elastomer) 30.50 mm (ID) x 32.10 mm (OD) x 0.80 mm (thick), this gasket can be a bezel gasket or case back gasket ...

Assortments of O-Ring Gaskets 0.60mm are supplied in a small plastic box. This assortment of O-Ring gaskets have a body diameter of 0.60mm and cont...

Extra Wide O-Ring Gasket Asst this is an extra wide o-ring gasket assortment that contains 60 gaskets of sizes ranging from 34.6 to 42mm in 0.80 an...

O-Ring Case Back Gasket number 84, package of 2, ID 36.50 mm, OD 38.10 mm, thickness 0.80 mm

O-Ring Case Back Gasket package of 3, ID 33.00 mm, OD 35.00 mm, thickness 1.00 mm

O-Ring Case Back Gasket package of 3, ID 33.00 mm, OD 34.60 mm, thickness 0.80 mm

O-Ring Case Back Gasket number 41, package of 2, ID 30.80 mm, OD 32.50 mm, thickness 0.85mm

O-Ring Case Back Gasket package of 4, ID 30.50 mm, OD 32.10 mm, thickness 0.80 mm

Slim O-Ring Case Back Gasket number 445, package of 2, ID 29.80 mm, OD 30.80 mm, thickness 0.50 mm

O-Ring Case Back Gasket package of 4, ID 26.50 mm, OD 27.90 mm, thickness 0.70 mm

ISO Swiss flat case back gasket number 139 package of 2 gaskets, ID 30.00 mm OD 31.50 mm thickness 0.50

ISO Swiss flat case back gasket number 137 package of 2 gaskets, ID 29.50 mm OD 31.00 mm thickness 0.50

ISO Swiss flat case back gasket number 602, package of 2 gaskets, ID 11.80 mm OD 13.40 mm thickness 0.40 mm

Bulk Micro O-ring Gasket assortment, contains 25 assorted Micro-O-ring gaskets for crowns and pushers.

Bulk O-Ring Gasket assortment contains 100 assorted O-ring gaskets, regular thickness

Micro Flat Gasket, to fit Rolex® 6.00 mm crown ext 4.00 x int. 2.40, sold individually * H. & W. Perrin Company Limited is independent of...

Micro O-ring Gaskets ext 2.00 x int. 0.80 x 0.60 thickness, package of 10

Horotec® Extensible and reversible movement holder in Aluminium 3 3/4"' to 11"', is used to hold watch movements when working on them

Omega® 098EG0028 L-crystal gasket 36.00 mm x 1.10 mm (thick) x 3.20 mm (height), fits Omega® case REF 1760009, 1760012, 1780002, 1780003SE, 178000...

Extra Wide O-Ring Gaskets 37x0.80mm Package of 3. From 67-3342B assortment. Extra Wide O-Ring Gaskets from 67-3342B assortment are available in 20 ...

Inside diameter 32.30 mm x height 1.50 mm. Using generic crystal gaskets may devalue your watch. * H. & W. Perrin Company Limited is independen...

Red Sans Fil Case Back Gasket number 852 ID 42.84 mm, OD 44.00 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 851 ID 42.34 mm, OD 43.50 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 850 ID 41.84 mm, OD 43.00 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 849 ID 41.34 mm, OD 42.50 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 848 ID 40.84 mm, OD 42.00 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 847 ID 40.34 mm, OD 41.50 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 846 ID 39.84 mm, OD 41.00 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 845 ID 39.34 mm, OD 40.50 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 844 ID 38.84 mm, OD 40.00 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 843 ID 38.34 mm, OD 39.50 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 842 ID 37.84 mm, OD 39.00 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 841 ID 37.34 mm, OD 38.50 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 840 ID 36.84 mm, OD 38.00 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 839 ID 36.34 mm, OD 37.50 mm, Height 0.90 mm, Width 0.58 mm

Red Sans Fil Case Back Gasket number 838 ID 35.84 mm, OD 37.00 mm, Height 0.90 mm, Width 0.58 mm