Clock Gongs

Leather Hammer Material has a diameter of 3/16" and is supplied in a 12" coil of leather hammer tip material.

Cuckoo Gong 100 mm is a round wire gong, 100 mm in diameter and made specifically for Cuckoo Clocks.

Spiral Gong 11cm is a round wire gong with a diameter of 11 cm, specifically for a mantel clock.

Hammer Rectangular Short is a short brass clock hammer with a nylon tip. A Hammer Rectangular Short is made for Hermle however can be used for a va...

Threaded Steel Gong Rod 26" Long, 3.30mm Thick is a threaded steel Chime rod that has a thread diameter of 6.5 mm, a length of 26" and a rod diamet...

FHS 451 Westminster Chime Unit 19 1/2" has 8 steel chime rods mounted on a base, total length of 19 1/2", used with Hermle movements 451.050 and 45...

Threaded Steel Gong Rod 26" Long, 3.6mm Rod is a threaded steel Chime rod that has a thread diameter of 6.5 mm, a length of 26" and a rod diameter ...

Threaded Copper Gong Rod 12" Long is a threaded copper Chime rod that has a thread diameter of 6.5 mm, a length of 12" and a rod diameter of 2.4 mm.

FHS 340.020 Westminster Chime Unit 7 1/2" has 5 brass chime rods mounted on a base, total length of 7 1/2", used with Hermle (FHS) 340.020 movement.

FHS 1151, 1161, 1171 V-Shaped Triple Chime Chime Unit 26 1/2" has 12 steel chime rods V- Shaped mounted on a base, total length of 26 1/2", used wi...

Cuckoo Gong 120 mm is a round wire gong, 120 mm in diameter and made specifically for Cuckoo Clocks.

Spiral Gong 7.5cm is a flat wire gong with a diameter of 7.5 cm, specifically for a mantel clock.

FHS 341, FHS 351 Westminster Chime Unit 7 3/4" has 5 brass chime rods mounted on a base, total length of 7 3/4", used with Hermle (FHS) 341 & 3...

FHS 1050 Triple Chime Chime Unit 7 3/4" has 8 brass chime rods mounted on a base, total length of 7 3/4", used with Hermle (FHS) 1050 movement.

Mantel Hammer 5/16" is a round 5/16" mantel clock hammer with leather tips. Product # 73-9033

Mantel Hammer 1/4" is a round 1/4" mantel clock hammer with leather tips. Product # 73-9032

Spiral Gong Rod FHS 75mm is a round wire gong, 75 mm in diameter and made for Hermle. Spiral Gong Rod FHS 75mm comes with a base.

FHS 350.060, FHS 351.060 Westminster Chime Unit 10 1/4" has 5 brass chime rods mounted on a base, total length of 10 1/4", used with Hermle (FHS) 3...

Spiral Gong Rod FHS 105mm is a round wire gong, 105 mm in diameter and made for Hermle.

Hammer Round Long is a long brass clock hammer, made for Hermle however can be used for a variety of movements.

Tap For Gong Base 6.5mm is for tapping cast iron gong bases when installing new chime rod with a 6.5 mm thread.

Strike Hammer Large is a large round strike hammer and has a soft leather tip.

French Hammer Assembly consists of a complete set including a nylon tipped hammer, rod and collet. A French Hammer Assembly is made specifically fo...

Gong Base Screws & Washers comes in a package of 4 washers and 4 screws. Gong Base screws & washers are designed to fit gong bases 73-803 t...

Gong Base Metal is 2 1/2" x 2" x 3/4" and made of metal. Height is measured at the raised center portion.

Threaded Steel Gong Rod 26", 8.00 mm is a threaded steel Chime rod that has a thread diameter of 8 mm, a length of 26" and a rod diameter of 3.60 mm.

Hammer Round Short is a short brass clock hammer, made for Hermle however can be used for a variety of movements.

Gong Rod Set of 4-19" comes in a set of 4 tuned Westminister steel gong rods with the longest measuring 19". Each Gong Rod in the set has a threade...

Gong Rod Set of 8- 26" comes in a set of 8 tuned Westminister steel gong rods with the longest measuring 26". Each Gong Rod in the set has a thread...

Gong Rod Set of 8- 17 1/4" comes in a set of 8 tuned Triple- Chime steel gong rods with the longest measuring 17 1/4". Each Gong Rod in the set has...

Gong Rod Set of 4- 26"- 6.5mm comes in a set of 4 tuned Westminister steel gong rods with the longest measuring 26". Each Gong Rod in the set has a...

Strike Hammer Medium is a medium round strike hammer and has a soft leather tip.

Hammer Wire 1.4mm is a brass hammer wire with collet, specifically for wall and mantel clocks. The Hammer Wire 1.4mm has a diameter of 1.4 mm with ...

Westminster Chime Unit 7" has 5 brass chime rods mounted on a base, total length of 7". The longest rod is closest to where the base screws onto ca...

Gong Base Iron is 2 1/2" in diameter and made of iron.

Hammer Rectangular Long is a long brass clock hammer with a nylon tip. A Hammer Rectangular Long is made for Hermle however can be used for a vari...

Clock Bim Bam Chime Unit 8" has 3 brass chime rods mounted on a base, total length of 8", used with Hermle (FHS) 241 and Hermle (FHS) 261 movements.

FHS 141.030 Clock Bim Bam Chime Unit 8" has 3 brass chime rods mounted on a base, total length of 8", used with Hermle (FHS) 141.030 movement.

Gong Rod Set of 8- 22 1/2" comes in a set of 8 Tuned Triple- Chime steel gong rods with the longest measuring 22 1/2". Each Gong Rod in the set ha...

Westminster Chime Unit 7" has 5 brass chime rods mounted on a base, total length of 7". The shortest rod is closest to where the base screws onto ...

FHS 451 Clock Westminister Chime Unit 19 3/4" Clock Westminister Chime Unit 19 3/4" has 12 steel chime rods mounted on a base, total length of the ...

Spiral Gong 8cm is a spiral gong specifically for a mantel clock mounted on a cast iron base with a diameter of 8 cm.

FHS 351.830 Westminster Chime Unit 11 3/4" has 8 brass chime rods mounted on a base, total length of 11 3/4", used with Hermle (FHS) 351-830 moveme...

FHS 241.080 Bim Bam Chime Unit 6 1/4" has 3 brass chime rods mounted on a base, total length of 6 1/4", used with Hermle 241-030 movement.

Clock Bim Bam Chime Unit 5 3/4" has 3 brass chime rods mounted on a base, total length of 5 3/4", used with Hermle movements 130.020 and 130.627.

FHS 1151, 1161, 1171 Triple Chime Chime Unit 26 1/2" has 12 steel chime rods mounted on a base, total length of 26 1/2", used with Hermle (FHS) mov...

Gong Rod Set of 8- 8" comes in a set of 8 tuned Westminister copper gong rods with the longest measuring 7". Each Gong Rod in the set has a threade...