Electric Clock Movements

These movements look identical to the standard series of mini clock movements, with the exception that these run on 110 V. Dimensions 54.0 mm (2-1/...

Electric Mini Clock Movement 3/4" is identical to the standard series mini clock movements but they run on 110V. The Takane Electric Mvmt 3/4" is i...

Hansen A129RB electric clock movement, 110 volts 60 cycle, 63.5 mm (2-1/2") (W) x 50.8 mm (2") (T) x 44.5 mm (1-3/4") (D). Overall shaft length 22....

Synchron Type C electric clock movements, 110 volts, 60 cycle, 76.2 mm (3") (W) x 82.6 mm (3-1/4") (T) x 57.2 mm (2-1/4") (D), tab mount. Overall s...

These movements look identical to the standard series of mini clock movements, with the exception that these run on 110 V. Dimensions 54.0 mm (2-1/...

Red Sweep Seconds Hand to Fit Synchron Motors 5 1/2" red sweep seconds hand, to fit a threaded shaft 2.2mm (3/32”), length 5 1/2” (139.7mm) from ce...

Red Sweep Seconds Hand to Fit Synchron Motors 5 1/2" red sweep seconds hand, to fit a threaded shaft 1.7 mm (1/16”), length 5 1/2” (139.7mm) from c...

These movements look identical to the standard series of mini clock movements, with the exception that these run on 110 V. Dimensions 54.0 mm (2-1/...

Red Sweep Seconds Hand to Fit Synchron Motors 3" red sweep seconds hand, to fit a threaded shaft 1.7 mm (1/16”), length 3” (center of hole to tip).

Mounting Bracket for Synchron Motor supplied with 2 bolts and 2 nylon lock nuts.

Motor Cover for Synchron Motors Motor Cover for Synchron motors, outside diameter 50.8 mm (2"), stamped "SYNCHRON MADE IN THE USA".

Threaded Fixation Nut 3/8" (with collar) to fit Synchron Motors This threaded fixation nut fits a threaded shaft 9.5 mm (3/8"). Largest diamete...

Threaded Fixation Nut 3/8" to fit Synchron Motors This threaded fixation nut fits a threaded shaft 9.5 mm (3/8"). Knurled on the outside, outside d...

Threaded Hand nut 1/4" to fit Synchron Motors This threaded hand nut fits a threaded hand shaft of 6.4 mm (1/4"). Knurled on the outside, outside d...

This threaded hand nut fits a threaded hand shaft of 4.0 mm (5/32"). Knurled on the outside, outside diameter 8.3 mm (21/64"). Height is 2.4 mm (3/...

This is an internal threaded bushing (sleeve), with a smooth outside finish, that fits a threaded shaft of 5/32", outside diameter of the bushing i...

This setting knob has a reverse thread of 3.2 mm (1/8"). Outside diameter is 12.7 mm (1/2"). Sold individually.

Collar Rod Extension with 2 Split Pins Collar with 2 brass split pins, to be used with a rod extension for bottom set Synchron movements.