Watch Parts by Brand

Omega®

Genuine Omega® barrel with for mainspring with T-end, 74 teeth, dia. of barrel 9.14 mm, total ht. 1.60 mm, part number 2001, fits Omega® 19.4 mm

Omega®

Genuine Omega® setting lever spring (yoke cover) for hunting case, part number 10036, fits Omega® 19.4 mm

Omega®

Genuine Omega® double roller, large roller dia. is 1.70 mm, part number 066, fits Omega® 19.4 mm

Omega®

Genuine Omega® threaded pallet arbor, part number 064, fits Omega® 19.4 mm

Omega®

Genuine Omega® balance staff, total height 2.65 mm, part number 062, fits Omega® 19.4 mm

Omega®

Genuine Omega® pallet fork with pin, dia. of the pivots 0.095 mm, part number 060, fits Omega® 19.4 mm

Omega®

Genuine Omega® escape wheel, part 056, Omega® base cal. 19.4

Omega®

Genuine Omega® fourth wheel, dia. of wheel 5.60 mm, dia. of pinion 0.91 mm, part 053, Omega® base cal. 19.4

Omega®

Genuine Omega® third wheel (for hunting case), dia. of the wheel 5.93 mm, part 052, Omega® base cal. 19.4

Omega®

Genuine Omega® center wheel with cannon pinion, part number 049, Omega® base cal. 19.4

Omega®

Genuine Omega® hour wheel ht. 1.45 mm for curved dial, 32 teeth, dia. of the tube 1.10 mm, dia. of the wheel 4.42 mm, part 047.1, fits Omega® 19.4 mm

Omega®

Genuine Omega® minute wheel, dia. of the wheel 4.16 mm, part 046, Omega® base cal. 19.4

Omega®

Genuine Omega® clutch wheel, 12 teeth on the wheel, 10 breguet teeth, whole dia. 0.68 mm, total ht. 2.00 mm, part number 033, fits Omega® 19.4 mm

Omega®

Genuine Omega® hand set lever spring, part number 2431, fits Omega® 19 NN, Omega® 20 NN

Omega®

Genuine Omega® clutch lever (hunting case), negative set, part number 2324, fits Omega® 19 NN, Omega® 43.15 NN, Omega® 20 NN

Omega®

Genuine Omega® setting lever screw negative set, part 508, fits Omega® 19 NN, Omega® 43.15 NN, Omega® 20'' NN, Omega® 21 NN, Omega® 47.7 NN

Omega®

Genuine Omega® hairspring (breguet, medium) with stud mounted, part number 473, fits Omega® 19 NN

Omega®

Genuine Omega® flat hairspring with stud mounted, part number 471, fits Omega® 19 NN

Omega®

Genuine Omega® threaded pallet arbor, height between bearings 1.72 mm for holes not jeweled, part number 454, fits Omega® 19 NN

Omega®

Genuine Omega® hand set lever, negative set (open face), part number 430, fits Omega® 19 NN

Omega®

Genuine Omega® levier de chevillot, negative set (hunting case), part number 424, fits Omega® 19 NN, Omega® 20 NN

Omega®

Genuine Omega® levier de chevillot, negative set (open face), part number 423, fits Omega® 19 NN, Omega® 20 NN

Omega®

Genuine Omega® clutch lever III negative set (open face), part number 421, fits Omega® 19 NN, Omega® 20 NN

Omega®

Genuine Omega® clutch lever I negative set, (open face), part number 419, fits Omega® 19 NN, Omega® 20 NN

Omega®

Genuine Omega® winding pinion for short stem, negative set, part 417, Omega® base cal. 19 NN (see all calibres in description)

Omega®

Genuine Omega® barrel arbor with short square dia. of thread 1.10 mm, total height 6.20 mm, part number 405, fits Omega® 19 NN

Omega®

Genuine Omega® pallet with wings, typically visible, part number 340, fits Omega® 19 NN

Omega®

Genuine Omega® setting wheel cover, negative set, dia. 5 mm, part number 328, fits Omega® 19 NN, Omega® 43.15 NN

Omega®

Genuine Omega® clutch lever II (for hunting case), negative set, part number 320, fits Omega® 19 NN

Omega®

Genuine Omega® double toothed crown wheel with large gouge "Louis Brandt", part number 312, fits Omega® 19 NN

Omega®

Genuine Omega® ratchet wheel "large gouge" with threaded center for pivoted barrel arbor "Louis Brandt", part number 309, fits Omega® 19 NN

Omega®

Genuine Omega® ratchet wheel with threaded center for pivoted barrel arbor "Louis Brandt", part number 307, fits Omega® 19 NN

Omega®

Genuine Omega® barrel arbor core, threaded for pivoted barrel arbor, part number 305, fits Omega® 19 NN

Omega®

Genuine Omega® barrel arbor pivoted for jeweled settings, part number 303, fits Omega® 19 NN

Omega®

Genuine Omega® barrel with cover for pivoted barrel arbor for jeweled settings, part number 301, fits Omega® 19 NN

Omega®

Genuine Omega® double tooth crown, polished with groove, part 029, Omega® base cal. 19 NN

Omega®

Genuine Omega® shipper spring, part number 628, fits Omega® 19 OM

Omega®

Genuine Omega® setting lever, part number 627, fits Omega® 19 OM

Omega®

Genuine Omega® crown wheel washer with pipe for crown wheel without crown wheel core, part number 3165, fits Omega® 19, Omega® 20

Omega®

Genuine Omega® dial fixing spring, part number 3157, fits Omega® 35.5 mm, Omega® 39.1 mm, Omega® 40.6 mm, Omega® 19, Omega® 19 NN, Omega® 20

Omega®

Genuine Omega® crown wheel washer flat, part number 2165, fits Omega® 19, Omega® 19 CHRO, Omega® 20 Omega® 20 NN

Omega®

Genuine Omega® barrel for stop works for mainspring with T-end, part number 2002, fits Omega® 19, Omega® 20

Omega®

Genuine Omega® balance complete (with breguet hairspring), height of balance staff 6.10 mm, dia. 15.20 mm, part number 190, fits Omega® 19

Omega®

Genuine Omega® center wheel with cannon pinion, pivot mainplate side 1.00 mm, part 184, fits Omega® 19

Omega®

Genuine Omega® center wheel with cannon pinion, pivot mainplate side 0.90 mm, part 183, fits Omega® 19, Omega® 20

Omega®

Genuine Omega® center wheel with cannon pinion, pivot mainplate side 1.10 mm, part 182, fits Omega® 19, Omega® 20

Omega®

Genuine Omega® screw for maltese cross, stop works, thread dia. 0.80 mm, part 159, Omega® base calibre 19 (see all calibres in description)

Omega®

Genuine Omega® pallet jewel - exit, part number 139 EXIT, fits Omega® 19, Omega® 19'' NN, Omega® 19 chronographe, Omega® 20, Omega® 20 NN

Omega®

Genuine Omega® pallet jewel - entry, part number 139 ENTRY, fits Omega® 19, Omega® 19'' NN, Omega® 19 chronographe, Omega® 20, Omega® 20 NN