Synchron A129RB Electric Clock Movement
Hansen A129RB electric clock movement, 110 volts 60 cycle, 63.5 mm (2-1/2") (W) x 50.8 mm (2") (T) x 44.5 mm (1-3/4") (D). Overall shaft length 22....
View full detailsHansen A129RB electric clock movement, 110 volts 60 cycle, 63.5 mm (2-1/2") (W) x 50.8 mm (2") (T) x 44.5 mm (1-3/4") (D). Overall shaft length 22....
View full detailsSynchron Type C electric clock movements, 110 volts, 60 cycle, 76.2 mm (3") (W) x 82.6 mm (3-1/4") (T) x 57.2 mm (2-1/4") (D), tab mount. Overall s...
View full detailsRed Sweep Seconds Hand to Fit Synchron Motors 5 1/2" red sweep seconds hand, to fit a threaded shaft 2.2mm (3/32”), length 5 1/2” (139.7mm) from ce...
View full detailsThis setting knob has a reverse thread of 3.2 mm (1/8"). Outside diameter is 12.7 mm (1/2"). Sold individually.
Electric Mini Clock Movement 3/4" is identical to the standard series mini clock movements but they run on 110V. The Takane Electric Mvmt 3/4" is i...
View full detailsThreaded Fixation Nut 3/8" to fit Synchron Motors This threaded fixation nut fits a threaded shaft 9.5 mm (3/8"). Knurled on the outside, outside d...
View full detailsThreaded Hand nut 1/4" to fit Synchron Motors This threaded hand nut fits a threaded hand shaft of 6.4 mm (1/4"). Knurled on the outside, outside d...
View full detailsCollar Rod Extension with 2 Split Pins Collar with 2 brass split pins, to be used with a rod extension for bottom set Synchron movements.
Mounting Bracket for Synchron Motor supplied with 2 bolts and 2 nylon lock nuts.
This threaded hand nut fits a threaded hand shaft of 4.0 mm (5/32"). Knurled on the outside, outside diameter 8.3 mm (21/64"). Height is 2.4 mm (3/...
View full detailsThis is an internal threaded bushing (sleeve), with a smooth outside finish, that fits a threaded shaft of 5/32", outside diameter of the bushing i...
View full detailsThese movements look identical to the standard series of mini clock movements, with the exception that these run on 110 V. Dimensions 54.0 mm (2-1/...
View full detailsThese movements look identical to the standard series of mini clock movements, with the exception that these run on 110 V. Dimensions 54.0 mm (2-1/...
View full detailsThreaded Fixation Nut 3/8" (with collar) to fit Synchron Motors This threaded fixation nut fits a threaded shaft 9.5 mm (3/8"). Largest diamete...
View full detailsRed Sweep Seconds Hand to Fit Synchron Motors 5 1/2" red sweep seconds hand, to fit a threaded shaft 1.7 mm (1/16”), length 5 1/2” (139.7mm) from c...
View full detailsRed Sweep Seconds Hand to Fit Synchron Motors 3" red sweep seconds hand, to fit a threaded shaft 1.7 mm (1/16”), length 3” (center of hole to tip).
Motor Cover for Synchron Motors Motor Cover for Synchron motors, outside diameter 50.8 mm (2"), stamped "SYNCHRON MADE IN THE USA".