WRP Hi-Dome Round Plastic (No Step) (23.10 mm to 39.00 mm)
These round plastic crystals have no step. These are high domed for watches needing clearance due to curved dials and higher cannon pinions and hou...
View full detailsThese round plastic crystals have no step. These are high domed for watches needing clearance due to curved dials and higher cannon pinions and hou...
View full detailsPlastic domed crystal with wide yellow or white reflector ring (please specify colour required).
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.40 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.50 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.60 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.90 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.40 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.50 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.90 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.60 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.90 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.40 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.40 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.50 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.60 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.5mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 5.60 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 5.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.06 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 6.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 6.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 7.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.80 mm.