Perrin

Wood Finial 1 5/8" x 2 1/2" Wood Finials 1 5/8" x 2 1/2" are ideal as a replacement for missing parts on old clock cases. Ready to be sanded and st...

Wood Finial 1" x 1 7/8" Wood Finials 1" x 1 7/8" are ideal as a replacement for missing parts on old clock cases. Ready to be sanded and stained, v...

Wood Finial 2 1/2" x 2 3/4" Wood Finials 2 1/2" x 2 3/4" are ideal as a replacement for missing parts on old clock cases. Ready to be sanded and st...

Wood Finial 2" x 4 5/8" Wood Finials 2" x 4 5/8" are ideal as a replacement for missing parts on old clock cases. Ready to be sanded and stained, v...

Wood Finial Tall 1 5/8" x 3" Wood Finials Tall 1 5/8" x 3" are ideal as a replacement for missing parts on old clock cases. Ready to be sanded and ...

Wood Handled Pin Pusher Wood Handle Pin Pusher is used to remove spring bars from watch cases or strap buckles. This pusher has a hardwood handle w...

This is a heavy duty wood hub mandrel with a 1/16” diameter screw for right side of a standard tapered spindle.

Wood Hub Wheel Brush, 1 Row, Upright, Overall diameter 3 1/8" Wood Hub Wheel Brush Style 1A, 1 Row, Upright, Overall diameter 3 1/8" consists of Ch...

Wood Hub Wheel Brush, 1 Row, Upright, Overall diameter 3" Wood Hub Wheel Brush, 1 Row, Upright, Overall diameter 3" consists of Chungking bristles ...

Wood Hub Wheel Brush, 4 Rows, Converging,  Overall diameter 2 5/8" Wood Hub Wheel Brush Style 2C, 2 Rows, Converging, Overall diameter 2 5/8" consi...

Wood Hub Wheel Brush, 4 Rows, Converging,  Overall diameter 3 1/8" Wood Hub Wheel Brush Style 2A, 2 Rows, Converging, Overall diameter 3 1/8" consi...

Wood Hub Wheel Brush, 2 Rows, Converging, Overall diameter 1 7/8" Wood Hub Wheel Brush, 2 Rows, Converging, Overall diameter 1 7/8" consists of Chu...

Wood Hub Wheel Brush, 2 Rows, Converging, Tapered Hole, Overall diameter 2 1/2" Wood Hub Wheel Brush Style 6A, 2 Rows, Converging, Overall diameter...

Wood Hub Wheel Brush, 2 Rows, Converging, Tapered Hole, Overall diameter 2"Wood Hub Wheel Brush Style 6C, 2 Rows, Converging, Overall diameter 2" c...

Wood Hub Wheel Brush, 3 Rows, Upright,  Overall diameter 2 3/4" Wood Hub Wheel Brush, 3 Row, Upright, Overall diameter 2 3/4" consists of Chungking...

Wood Hub Wheel Brush, 4 Rows, Converging,  Overall diameter 3 1/2" Wood Hub Wheel Brush, 4 Rows, Converging, Overall diameter 3 1/2" consists of Ch...

Wood Hub Wheel Brush, 3 Rows, Converging,  Overall diameter 3"Wood Hub Wheel Brush, 4 Rows, Upright, Overall diameter 3" consists of Chungking bris...

Wood Pendulum Rod 18 1/8" is a wooden pendulum that has a wood column length of 18 1/8".

Wood Works 3 Piece Suspension Individual are 0.004" (0.09 mm) thick and 24" (635 mm) long. Suspensions are folded in half for our customers who wis...

Wood Works 3 Piece Suspension Package of 12 suspensions that are 0.004" (0.09 mm) thick and 24" (635 mm) long. Suspensions are folded in half for o...

Woodcutter Clock Figure a wooden cuckoo clock figure that has a moving arm. The Woodcutter is 50 mm in height.

Wooden Block for Reamer Handle and Reamers This Wooden Block has one large hole, and 11 small holes to accept both American Made and German Made KW...

Wooden Bur Block Handy Block Varnished wooden block for storing burs. The sloped upper surface staggers the rows of burs like seating in a theater....

Wooden Bushing Box - 24 Hole A wooden box with drilled holes to accept clock bushings. Sliding top also has holes, allowing you controlled access...

Wooden Bushing Box - 40 Hole A wooden box with drilled holes to accept clock bushings. Sliding top also has holes, allowing you controlled access ...

Wooden Couple 39 mm a wooden, hand painted cuckoo clock figure. The Wooden Couple 39 mm has a height of 39 mm.

Wooden Pendulum Cover This is an unfinished wood cover which slides for the brass pendulum rods supplied with battery operated clock movements. Giv...

Wooden Tweezer to Hold Rings can be used to hold rings when cleaning with a steam cleaner. This tweezer has 6 grooves, should you require to clean ...

Plastic domed crystal with a reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

Plastic domed crystal with a reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

Plastic domed crystal with a reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

Plastic domed crystal with an undercut reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

Plastic domed crystal with an undercut reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

Plastic domed crystal with an undercut reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

Plastic domed wide ring crystal with a reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

Plastic domed wide ring crystal with a reflector ring. Crystal is supplied with a yellow or white ring (please specify colour required).

These round plastic crystals have no step. These are high domed for watches needing clearance due to curved dials and higher cannon pinions and hou...

These round plastic crystals have no step. These are high domed for watches needing clearance due to curved dials and higher cannon pinions and hou...

These round plastic crystals have no step. These are high domed for watches needing clearance due to curved dials and higher cannon pinions and hou...

Plastic domed crystal with wide yellow or white reflector ring (please specify colour required).

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.00 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.10 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.20 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.30 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.40 mm.

This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.50 mm.