PERRIN

180 Blue Steel Pivot Wire 180 Blue Steel Pivot Wire, is a single 3" piece of blue steel pivot wire with a diameter of 1.80 mm. Used in both watch ...

185 Blue Steel Pivot Wire 185 Blue Steel Pivot Wire, is a single 3" piece of blue steel pivot wire with a diameter of 1.85 mm. Used in both watch ...

18K Test Acid Ready to use, targeted test acid. Use in conjunction with a black test stone. Supplied in a half ounce shatterproof dropper bottle wi...

18mm Classic Lobster Clasp are used to securely fasten necklaces and bracelets. These lobster clasps are 18mm. This clasp is available in a variety...

18mm Costume Lobster Clasps are used to securely fasten necklaces and bracelets. These lobster clasps are nickel free and lead free and are 15mm in...

19 mm Curved End Piece with Pointed Tips are available in steel. two toned, and yellow. The width of the case (A) measures 19 mm and cut (B) is ava...

19 mm Curved End Piece with Rounded Tips are available in two tone and steel. The width of the case (A) measures 19 mm and cut (B) is available in ...

190 Blue Steel Pivot Wire 190 Blue Steel Pivot Wire, is a single 3" piece of blue steel pivot wire with a diameter of 1.90 mm. Used in both watch ...

195 Blue Steel Pivot Wire 195 Blue Steel Pivot Wire, is a single 3" piece of blue steel pivot wire with a diameter of 1.95 mm. Used in both watch ...

2 1/4" Adjustable Mantel Pendulum is an adjustable mantel clock pendulum with a brass plated cap and a diameter of 2 1/4". 2 1/4" Adjustable mantel...

2 3/4 lbs 30 Hour Empire Column Weight is an iron weight that measures 4 1/2" by 2 1/4" by 1 1/8". 30 Hour Empire Column Weight weighs 2 3/4 lbs.

2 3/4 lbs Wag-on Wall Weight is an iron weight that measures 4 1/2" long and 2" in diameter. Wag-on Wall Weight weighs 2 3/4 lbs.

2 Cam Chain Gear is a music box chain gear for a top mount, 2 cam.

Synchron Type C electric clock movements, 110 volts, 60 cycle, 76.2 mm (3") (W) x 82.6 mm (3-1/4") (T) x 57.2 mm (2-1/4") (D), tab mount. Overall s...

2 Jaw Case Wrench for Oversize Watch Cases is a pocket sized case wrench designed for opening screw back watch cases. It features a thumb screw at ...

2 Jaw Case Wrench for Standard Size Watch Cases is a pocket sized case wrench designed for opening screw back watch cases. It features a thumb scre...

2 Regulator Assembly #2 regulator assembly fastens to the pendulum rod to allow for the pendulum bob to be attached to the rod. #2 regulator assem...

2 Regulator Clock Hanger a brass clock hanger #2 regulator.

2 Regulator Weight Core is a lead clock weight specifically for #2 Regulator clocks. #2 Regulator Weight Core weighs 5 lbs.

#2 Regulator Weight Hook comes as a set with one washer and one hook.

2 Strand Rondele Spacer a sterling silver divider that has 5.5mm spacing between holes and measures 2.5 x 10mm.

2 x 3mm Twisted Crimp is available in sterling silver and in 2 x 3mm. Crimps are used to secure beading wire at the start and ends of the design. ...

2,200 grams (4.85 lbs) Clock Weight #13 comes from Germany and is made of cast iron, painted black. Clock Weight #13 weighs approximately 2,200 gra...

Domed top and flat bottom – aka Single Dome - approximate thickness at center is 3.50 mm. This crystal gives a domed look without the need for han...

2.00 mm Regular Spring Bars - pkg of 12

2.00 mm Stainless Steel Flanged Spring Bars - pkg of 12

Domed top and domed bottom – aka Double Domed – for watches with curved dials and/or with high pinions or sweep second hand. This crystal is finish...

Domed top and domed bottom – aka Double Domed – for watches with curved dials and/or with high pinions or sweep second hand. This crystal is finish...

These round blanks are ideally suited to be used with the crystal cutting machine. We prefer using round blanks versus square blanks due to the fac...

These round blanks are ideally suited to be used with the crystal cutting machine. We prefer using round blanks versus square blanks due to the fac...

2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...

2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...

2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...

2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...

2.00 mm round mineral crystals can be fitted into a gasket. Can be cemented directly into the seat of the bezel but not recommended. This crystal i...

This crystals are a scratch resistant crystals for high-end watches. This crystals have a polished top edge.

This crystals are a scratch resistant crystals for high-end watches. This crystals have a polished top edge.

This crystals are a scratch resistant crystals for high-end watches. This crystals have a polished top edge.

This crystals are a scratch resistant crystals for high-end watches. This crystals have a polished top edge.

This crystals are a scratch resistant crystals for high-end watches. This crystals have a polished top edge.

This crystals are a scratch resistant crystals for high-end watches. This crystals have a polished top edge.

This crystals are a scratch resistant crystals for high-end watches. This crystals have a polished top edge.

2.5 mm Rivets for Pressure Bars (Gucci style) has a head diameter of 2.5 mm to fit a 1.30 mm bar. The post diameter measures 1.00 mm and features a...

Domed top and flat bottom – aka Single Dome - approximate thickness at center is 3.60 mm. This crystal gives a domed look without the need for han...

Domed top and flat bottom – aka Single Dome - approximate thickness at center is 3.60 mm. This crystal gives a domed look without the need for han...

These round blanks are ideally suited to be used with the crystal cutting machine. We prefer using round blanks versus square blanks due to the fac...

These round blanks are ideally suited to be used with the crystal cutting machine. We prefer using round blanks versus square blanks due to the fac...