Draw In Spindle to fit Boley lathe
This is not an original Boley Spindle. It does fit the Boley lathe and accepts both the Boley lathe chucks as well as the WW pattern lathe chuck...
View full detailsThis is not an original Boley Spindle. It does fit the Boley lathe and accepts both the Boley lathe chucks as well as the WW pattern lathe chuck...
View full detailsVery supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...
View full detailsVery supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...
View full detailsVery supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...
View full detailsVery supple, absolutely noiseless and without junction. This belt may be cust at the required length and joined in a few seconds. Supplied by the...
View full detailsThis fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.90 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.40 mm.
Lathe Chuck Grinding Wheel Holder to accommodate wheels with a hole fitting of 10.00 mm. This fits into the lathe at 6.80 mm, shank diameter is...
View full detailsLathe Chuck Milling Cutter Holder to accommodate wheels with a hole fitting of 5.00 mm. This fits into the lathe at 6.80 mm, shank diameter is ...
View full detailsShilling Chuck for Pocket Watch Balances, fits a number 50 wire chuck
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.40 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.50 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.60 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 1.90 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.20 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.40 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.50 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 2.90 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.30 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.60 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.70 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.80 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 3.90 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 0.40 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.00 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.10 mm.
This fits into the lathe at 6.80 mm, shank diameter is 8.00 mm. This American lathe chuck has an opening of 4.20 mm.